職歴

2022年4月 - 現在　大阪公立大学 大学院工学研究科 機械系専攻 教授 

2007年4月 - 現在　大阪府立大学 大学院工学研究科 機械系専攻 教授 

2015年10月 - 2016年03月　東北大学客員教授

2009年04月 - 現在　同志社大学理工学部機械系学科嘱託講師

1993年04月 - 1998年09月　東京工業大学原子炉工学研究所，総合理工学研究科助手

1990年04月 - 1993年03月　東北大学流体科学研究所助手

学歴

1987年04月 - 1990年03月　東京工業大学   大学院理工学研究科   機械工学専攻   博士課程   修了

1985年04月 - 1987年03月　東京工業大学   大学院理工学研究科   機械工学専攻   修士課程   修了

1981年04月 - 1985年03月　東京工業大学   工学部   機械工学科   学士課程   卒業

1978年04月 - 1980年03月　広島県立広島皆実高等学校   普通科     卒業

Journal publication
[2022]
1.  H. Yamasaki, Y. Mizuguchi , R. Nishioka, Y. Fukuda, T. Kuroki, H. Yamamoto, and M. Okubo, Pilot-Scale NOx and SOx Aftertreatment by Semi-Dry Plasma-Chemical Hybrid Process in Glass-Melting-Furnace Exhaust Gas, Springer US, Plasma Chemistry and Plasma Processing, 42, pp. 51-71 (2022.1). https://doi.org/10.1007/s11090-021-10193-4
(Open access PDF) (View)

[2021]
2. H. Yamasaki, Y. Mizuguchi, K. Maeda, H. Fujishima, T. Kuroki，H. Yamamoto, and M. Okubo, Performance Evaluation of Semi-dry Flue Gas Desulfurization and Denitration from Flue Gas of a Glass Melt Using Nonthermal Plasma Combined Process, Mechanical Engineering Journal, 8(3), 20-00519 (total 15 pages) (2021.3). https://doi.org/10.1299/mej.20-00519

3. S. Hirano, Y. Shimizu, T. Kuroki, and M. Okubo, Diesel Engine Exhaust Gas Treatment Technology Using NOx Recirculation Technique, Journal of the Japan Institution of Marine Engineering，56 (5), pp. 824-829 (2021.5) (in Japanese).

4. H. Yamasaki, S. Nomura, X. Xun, T. Kuroki, J. Kang, T. Yagi, and M. Okubo, Toward NOₓ/SOₓ and Nanoparticle Control Technology Using a Single-Stage Wet-Type Nonthermal Plasma Reactor, IEEE Transactions on Plasma Science, 49 (6), pp. 1860-1870 (2021.6). doi: 10.1109/TPS.2021.3080681
(Open access PDF)

5. M. Narita, M. Nakamura, T. Kuroki, and M. Okubo, Adhesive Polytetrafluoroethylene Films Fabricated Via Atmospheric Nonthermal Plasma Graft Polymerization, Journal of the Adhesion Society of Japan, 57 (7), pp. 280-290 (2021.7).

[2020]
6. T. Kuwahara, K. Yoshida, T. Kuroki, K. Hanamoto, K. Sato, and M. Okubo, Pilot-Scale Combined Reduction of Accumulated Particulate Matter and NOx Using Nonthermal Plasma for Marine Diesel Engine, IEEE Transactions on Industry Applications, 56 (2), 1804-1814 (2020.3).

7. M. Okubo and M. Tahara, Streamers Induced by Dielectric Barrier, Electrohydraulic Discharge, J. Inst. Electrostat. Jpn., 静電気学会誌，44 (5), 216-217 (2020.9). http://www.iesj.org/content/files/pdf/papers/44/44-5-216.pdf
(Open access PDF)

8.  M. Okubo, Y. Hiroyasu, and T. Kuroki, Ion Cluster Formation by Nonthermal Plasma Induced by Pulse Corona Discharge Toward Indoor Air Cleaning, IEEE Transactions on Industry Applications, 56 (5), 5480-5488 (2020.9).

9. K. Kishimoto, Y. Kumazawa, T. Kuroki, H. Yamasaki, and M. Okubo, Ultrasonically Enhanced Electrohydraulic Discharge for Removal of Organic Compounds, J. Electrostat., 108, 103502 (2020.11). https://doi.org/10.1016/j.elstat.2020.103502

10. T. Kuroki, M. Nakamura, K. Hori, and M. Okubo, Effect of Monomer Concentration on Adhesive Strength of PTFE Films Treated with Atmospheric-Pressure Nonthermal Plasma Graft Polymerization, J. Electrostat. 108, 103526 (2020.11). https://doi.org/10.1016/j.elstat.2020.103526

11. H. Yamasaki, S. Kamei, T. Kuroki, and M. Okubo, Adsorbed CO2 Dissociation Using Argon and Helium Nonthermal Plasma Flows, IEEE Transactions on Industry Applications, 56 (6), 6983-6989 (2020.11).

12. T. Kuroki, S. Nomura, H. Yamasaki, and M. Okubo, Performance of a Wet-Type Nonthermal Plasma Reactor for NOx, SOx, and Wastewater Treatment, IEEE Transactions on Industry Applications, 56 (6), 6978-6982 (2020.11)

13. H. Yamasaki, Y. Kumazawa, T. Kuroki, and M. Okubo, Enhancement of a Pulsed Electrohydraulic Discharge by Ultrasound Irradiation, J. Inst. Electrostat. Jpn., 静電気学会誌，44 (5), 216-217 (2020.11). http://www.iesj.org/content/files/pdf/papers/44/44-6-263.pdf
(Open access PDF)

14. H. Yamasaki, A. Shidara, Y. Shimidzu, T. Kuroki, H. -J. Kim, M. Okubo, In-Flight Diesel Particulate Matter Removal Using Nonthermal Plasma Filtering, International Journal of Plasma Environmental Science and Technology, 14, 3, e03007 (13pp) (2020.12). https://doi.org/10.34343/ijpest.2020.14.e03007
(Open access PDF)

[2019]
15.  Y. Togashi, T. Kuroki, and M. Okubo, Improvement in Molecular-Level Adhesive Strength of PTFE Film Treated by Atmospheric Plasma Combined Processing, K. Hori, S. Fujimoto, IEEE Transactions on Industry Applications, 55 (1), 825-832 (2019.1).

16. Y. Otaki, Y. Kumazawa, T. Kuroki, and M. Okubo, Phenol Decomposition Using Pulsed Discharge Plasma Combined with Ultrasound, J. Inst. Electrostat. Jpn. 43(1), 19-24 (2019.2). (in Japanese)

17. T. Kuroki, K. Hirai, S. Matsuoka, J. Y. Kim, and M. Okubo, Oxidative Decomposition of Adsorbed Toluene Using Ozone Concentrated by Nonthermal Plasma Flow, IEEE Transactions on Industry Applications, 55 (3), 3122-3128 (2019.5).

18. H. Yamasaki, Y. Koizumi, T. Kuroki, and M. Okubo, Plasma–Chemical Hybrid NOx Removal in Flue Gas from Semiconductor Manufacturing Industries Using a Blade-Dielectric Barrier-Type Plasma Reactor, Energies, Multidisciplinary Digital Publishing Institute, 12 (14), 2717 (2019.7).

19. T. Kuwahara, K. Yoshida, T. Kuroki, K. Hanamoto, K. Sato, and M. Okubo, High Reduction Efficiencies of Adsorbed NOx in Pilot-Scale Aftertreatment Using Nonthermal Plasma in Marine Diesel-Engine Exhaust Gas, Energies, Multidisciplinary Digital Publishing Institute, 12 (19), 3800 (2019.10).

20. H. Yamamoto, T. Kuroki, H. Fujishima, and M. Okubo, Pilot-Scale NOx and SOx Aftertreatment Using a Two-Phase Ozone and Chemical Injection in Glass-Melting-Furnace Exhaust Gas, IEEE Transactions on Industry Applications, 55 (6), 6295-6302 (2019.11).

[2018]
21. K. Takehana, T. Kuroki, and M. Okubo, Evaluation on Nitrogen Oxides and Nanoparticle Removal and Nitrogen Monoxide Generation Using a Wet-Type Nonthermal Plasma Reactor, Journal of Physics D: Applied Physics, 51 (20), 204002, total 11 pages (2018.4).

22. M. Okubo, K. Takahashi, S. Kamiya, and T. Kuroki, High-Efficiency Carbon Dioxide Reduction Using Nonthermal Plasma Desorption, IEEE Transactions on Industry Applications, 54 (6), 6422-6429 (2018.11).

[2017]
23. T. Kuroki, M. Tanaka, and M. Okubo, Decomposition of Toluene Adsorbed on Hydrophobic Zeolite by Nonthermal Plasma Flow with Water Spray, International Journal of Plasma Environmental Science & Technology, 11 (1), 92-97 (2017.4).

24. M. Okubo, T. Kuroki, H. Yamada, K. Yoshida, and T. Kuwahara, CO2 Concentration Using Adsorption and Nonthermal Plasma Desorption, IEEE Transactions on Industry Applications, 53 (3), 2432-2439 (2017.5).

25. T. Kuroki, S. Nishii, T. Kuwahara, and M. Okubo, Nanoparticle Removal and Exhaust Gas Cleaning Using Gas-liquid Interfacial Nonthermal Plasma, Journal of Electrostatics, 89, 86-92(2017.6).

26. T. Kuroki, T. Yamamoto, S. Nishii, M. Akita, and M. Okubo, Removal of High Concentrations of the Anesthetic Gas Nitrous Oxide Using Nonthermal Plasma Combined with an Adsorbent, IEEE Transactions on Industry Applications, 53 (6), 5852-5858 (2017.11).

27. M. Okubo, H. Yamada, K. Yoshida, and T. Kuroki, Simultaneous Reduction of Diesel Particulate and NOx Using a Catalysis-Combined Nonthermal Plasma Reactor, IEEE Transactions on Industry Applications, 53 (6), 5875-5882 (2017.11).

[2016]
28. H. Yamamoto, T. Kuroki, H. Fujishima, and M. Okubo, Pilot-Scale Exhaust Gas Treatment for a Glass Manufacturing System Using a Plasma Combined Wet Chemical Process, Mechanical Engineering Journal, Vol. 3, No. 1, pp. 15-00549-15-00549 (2016.1).

29. T. Kuwahara, H. Nakaguchi, T. Kuroki, and M. Okubo, Continuous Reduction of Cyclic Adsorbed and Desorbed NOx in Diesel Emission using Nonthermal Plasma, Journal of Hazardous Materials, Elsevier, Vol. 306, No. 5, pp. 216-224 (2016.5).

30. H. Yamamoto, T. Kuroki, H. Fujishima, Y. Yamamoto, K. Yoshida, and M. Okubo, Pilot-Scale Exhaust Gas Treatment for a Glass Manufacturing System Using a Plasma Combined Semi-dry Chemical Process, IEEE Transactions on Industry Applications, 53 (2), 1416-1423 (2016.10).

31. M. Okubo, T. Onji, T. Kuroki, H. Nakano, E. Yao, and M. Tahara, Molecular-Level Reinforced Adhesion Between Rubber and PTFE Film Treated by Atmospheric Plasma Polymerization, Plasma Chemistry and Plasma Processing, Springer, 36 (6), 1431-1448 (2016.11).

32. H. Yamamoto, T. Kuroki, H. Fujishima, Y. Yamamoto, K. Yoshida, and M. Okubo, NOx and SOx Removals for Exhaust Gas in Glass Melting Furnace Using a Plasma and Dry Chemical Hybrid Process, Transactions of. JSME, 82 (843), 16-00255, total 12 pages (2016.11). (in Japanese)

[2015]
33. T. Kuroki, K. Nakayama, D. Nakamura, T. Onji, and M. Okubo, Nonthermal Plasma Hybrid Process for Preparation of Organic Electro-luminescence Fluoropolymer Film Devices, IEEE Transactions on Industry Applications, Vol. 51, No. 3, pp. 2497-2503 (2015.5).

34. T. Kuroki, S. Nishii, and M. Okubo, Fundamental Study on the Simultaneous Removal of Nanoparticles and Harmful Gas Components Using a Wet-Type Discharge Plasma Reactor, Aerosol Research, Japan Association of Aerosol Science and Technology, Vol. 30, No. 2, pp. 108-113 (2015.6) (in Japanese).

35. T. Kuwahara, K. Yoshida, K. Hanamoto, K. Sato, T. Kuroki, and M. Okubo, Effect of Exhaust Gas Temperature on Oxidation of Marine Diesel Emission Particulates with Nonthermal-Plasma-Induced Ozone, Ozone Science & Engineering, Taylor & Francis, Vol. 37, No. 6, pp. 518-526, (2015.11).

36. Y. Yamamoto, H. Yamamoto, D. Takada, T. Kuroki, H. Fujishima, and M. Okubo, Simultaneous Removal of NOx and SOx from Flue Gas of a Glass Melting Furnace Using a Combined Ozone Injection and Semi-dry Chemical Process, Ozone Science & Engineering, Taylor & Francis (2015.11) (accepted, in press).

37. M. Okubo, Evolution of Streamer Groups in Nonthermal Plasma, Physics of Plasmas, AIP Publishing, Vol. 22, No. 12, 123515 (2015.12).

[2014]
38. T. Kuwahara, K. Yoshida, T. Kuroki, K. Hanamoto, K. Sato, and M. Okubo, Pilot-Scale Aftertreatment Using Nonthermal Plasma Reduction of Adsorbed NOx in Marine Diesel-Engine Exhaust Gas, Plasma Chemistry and Plasma Processing, Springer, Vol. 34, No. 1, pp. 65-81 (2014.1).

39. T. Kuroki, H. Yamamoto, H. Fujishima, D. Takada, Y. Yamato, M. Okubo, NOx Removal for Flue Gas in Glass Furnace using an Ozone Injection Chemical Hybrid Process(Laboratory Experiments with Semi-Dry Model System), Journal of the Institute of Electrostatics Japan, Vol. 38, No. 1, pp. 52-58 (2014.1) (in Japanese).

40. T. Kuroki, M. Tahara, T. Kuwahara, and M. Okubo, Microfabrication and Metal Plating Technologies on Polytetrafluoroethylene Film Surface Treated by Atmospheric Pressure Nonthermal Plasma Graft Polymerization Process, IEEE Transactions on Industry Applications, Vol. 50, No. 1, pp. 45-50 (2014.1).

41. M. Tahara and M. Okubo, Detection of Free Radicals Produced by a Pulsed Electrohydraulic Discharge Using Electron Spin Resonance, Journal of Electrostatics, Elsevier, Vol. 72, No. 3, pp. 222-227 (2014.6).

[2013]
42. T. Kuroki, T. Oishi, T. Yamamoto, and M. Okubo, Bromomethane Decomposition Using a Pulsed Dielectric Barrier Discharge, IEEE Transactions on Industry Applications, Vol. 49, No. 1, pp. 293-297 (2013.1).

43. H. Kido, T. Kuroki, M. Okubo, and Y. Utsumi, Application of Photo-Etching of Polytetrafluoroethylene Induced by High Energy Synchrotron Radiation to LIGA, Microsystem Technologies, Springer, Vol. 19, No. 9, pp. 301-307 (2013.3).

44. T. Kuwahara, M. Nishimoto, K. Yoshida, T. Kuroki, and M. Okubo, Effect of Exhaust Gas Temperature on Low-Temperature Treatment of Diesel Particulates with Indirect Plasma, Transactions of JSME, Vol. 79B, No.800, pp. 723-727 (2013.4) (in Japanese).

45. H. Fujishima, K. Takekoshi, T. Kuroki, A. Tanaka, K. Otsuka, and M. Okubo, Towards Ideal NOx Control Technology for Bio-Oils and a Gas Multi-Fuel Boiler System Using a Plasma-Chemical Hybrid Process, Applied Energy, Elsevier, Vol. 111, pp. 394-400 (2013.11).

46. T. Kuwahara, S. Nishi, T. Kuroki, and M. Okubo, Complete Regeneration Characteristics of Diesel Particulate Filter Using Ozone Injection, Applied Energy, Elsevier, Vol. 111, pp. 652-656 (2013.11).

47. K. Yoshida, T. Kuwahara, T. Kuroki, and M. Okubo, Influence of Injection of Concentrated NOx into Diesel Engine Intake on Exhaust Gas Components and Fuel Consumption, Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshu), Vol. 182, No. 3, pp. 39-47 (2013.11).

[2012]
48.  T. Kuwahara, M. Nishimoto, K. Yoshida, T. Kuroki, and M. Okubo, Development of Plasma-Assisted NOx Aftertreatment System for Clean Diesel Engine : Experiments with A type of Heavy Oil Fuel, Journal of JSAEM, the Japan Society of Applied Electromagnetics and Mechanics, Vol. 20, No. 1, pp. 21-27 (2012.3) (in Japanese).

49. T. Kuwahara, K. Yoshida, K. Hanamoto, K. Sato, T. Kuroki, T. Yamamoto, and M. Okubo, Continuous Regeneration Characteristics of Ceramic Particulate Filter in Marine Diesel Engine Using Nonthermal Plasma-Induced Ozone Injection, Journal of the Japan Institution of Marine Engineering, Vol. 47, No. 3, pp. 379-384 (2012.5).

50. T. Kuwahara, D. Shinohara, T. Kuroki, K. Yoshida, and M. Okubo, Development of Clean Diesel Engine with Plasma-Assisted Aftertreatment System (Achievement of System Energy Efficiency of 385 g(NO2)/kWh Using Nonthermal Plasma and EGCR), Transactions of JSME, Vol. 78B, No. 789, pp. 1029-1033 (2012.5) (in Japanese).

51. Z. Feng, N. Saeki, T. Kuroki, M. Tahara, and M. Okubo, Surface Modification by Nonthermal Plasma Induced by Using Magnetic-Field-Assisted Gliding Arc Discharge, Applied Physics Letters, Vol. 101, No. 4, Article number 041602 (2012.7).

52. K. Yoshida, T. Kuwahara, T. Kuroki, and M. Okubo, Diesel NOx Aftertreatment by Combined Process Using Temperature Swing Adsorption, NOx Reduction by Nonthermal Plasma, and NOx Recirculation: Improvement of the Recirculation Process, Journal of Hazardous Materials, Elsevier, Vol. 231-232, pp. 18-25 (2012.9).

53. T. Kuwahara, K. Yoshida, K. Hanamoto, K. Sato, T. Kuroki, T. Yamamoto, and M. Okubo, Pilot-scale Experiments of Continuous Regeneration of Ceramic Diesel Particulate Filter in Marine Diesel Engine Using Nonthermal Plasma-Induced Radicals, IEEE Transactions on Industry Applications, Vol. 48, No. 5, pp. 1649-1656 (2012.9).

54. T. Kuwahara, T. Kuroki, K. Yoshida, N. Saeki, and M. Okubo, Development of Sterilization Device Using Air Nonthermal Plasma Jet Induced by Atmospheric Pressure Corona Discharge, Thin Solid Film, Elsevier, Vol. 523, pp. 2-5 (2012.11).

[2011]
55. T. Aoi, T. Kuroki, M. Tahara, and M. Okubo, Improvement of Strength Characteristics of Aerospace Fiber Reinforced Composite Materials Using Atmospheric Pressure Plasma-Graft Polymerization Treatment, The Transactions of the Institute of Electrical Engineers of Japan, Vol. 131A, No. 5, pp. 412-413 (2011.5) (in Japanese).

56. T. Kuwahara, M. Okubo, T. Kuroki, H. Kametaka, and T. Yamamoto, Odor Removal Characteristics of a Laminated Film-Electrode Packed-Bed Nonthermal Plasma Reactor, Sensors, Open Access Journal by Multidisciplinary Digital Publishing Institute, Vol. 11, No. 6, pp. 5529-5542 (2011.6).

57. T. Kuroki, K. Hirai, S. Matsuoka, J.Y. Kim, and M. Okubo, Oxidation System of Adsorbed VOCs on Adsorbent Using Nonthermal Plasma Flow, IEEE Transactions on Industry Applications, Vol. 47, No. 4, pp. 1916-1921 (2011.7).

58. M. Okubo, T. Kuroki, and N. Saeki, Simultaneous Removal of Odor and Particulate Using Plasma-Treated Polymer Filters, Thin Solid Films, Elsevier, Vol. 519, No. 20, pp. 6994-6998 (2011.8).

59. H. Fujishima, Y. Yoshioka, T. Kuroki, A. Tanaka, K. Otsuka, and M. Okubo, Development of Low-Emission Bio-Fuel Boiler System with Plasma-Chemical Hybrid NOx Reduction, IEEE Transactions on Industry Applications, Vol. 47, No. 5, pp. 2210-2217 (2011.9).

60. Z. Feng, N. Saeki, T. Kuroki, M. Tahara, and M. Okubo, Magnetic-Field-Assisted Gliding Arc Discharge Plasma for Surface Modification, IEEE Transactions on Plasma Science, Vol. 39, No. 11, pp. 2846-2847 (2011.11).

61. K. Yoshida, T. Kuwahara, T. Kuroki, and M. Okubo, The Influence on Exhaust Gas Components and Fuel Consumption of Injection of Concentrated NOx into Diesel Engine Intake, The Transactions of the Institute of Electrical Engineers of Japan, Vol. 131C, No. 11, pp. 1933-1939 (2011.11) (in Japanese).

62. T. Kuwahara, K. Yoshida, Y. Kannaka, T. Kuroki, and M. Okubo, Improvement of NOx Reduction Efficiency in Diesel Emission Control Using Nonthermal Plasma Combined Exhaust Gas Recirculation Process, IEEE Transactions on Industry Applications, Vol. 47, No. 6, pp. 2359-2366 (2011.11).

[2010]
63. T. Kuroki, M. Ishidate, M. Okubo, and T. Yamamoto, Charge-to-mass Ratio and Dendrite Structure of Diesel Particulate Matter Charged by Corona Discharge, Carbon, Elsevier, Vol. 48, pp. 184-190 (2010.1).

64. Y. Utsumi, S.Yamamoto, T. Kuroki, and M. Okubo, Direct Bonding of PTFE Sheets Assisted by Synchrotron Radiation Induced Surface Modification, Microsystem Technologies, Vol. 16, No. 8-9, pp. 1495-1500 (2010.2).

65. T. Kuroki, K. Hirai, R. Kawabata, M. Okubo, and T. Yamamoto, Decomposition of Adsorbed Xylene on Adsorbent Using Nonthermal Plasma with Gas Circulation, IEEE Transactions on Industry Applications, Vol. 46, No. 2, pp. 672-679 (2010.3).

66. H. Fujishima, T. Kuroki, T. Ito, K. Otsuka, T. Yamamoto, K. Yoshida, and M. Okubo, Performance Characteristics of Pilot-Scale Indirect Plasma and Chemical System Used for the Removal of NOx from Boiler Emission, IEEE Transactions on Industry Applications, Vol. 46, No. 5, pp. 1707-1714 (2010.9).

67. H. Fujishima, A. Tatsumi, T. Kuroki, A. Tanaka, K. Otsuka, T. Yamamoto, and M. Okubo, Improvement in NOx Removal Performance of the Pilot-Scale Boiler Emission Control System Using an Indirect Plasma Chemical Process, IEEE Transactions on Industry Applications, Vol. 46, No. 5, pp. 1722-1729 (2010.9).

68. M. Okubo, M. Tahara, Y. Aburatani, T. Kuroki, and T. Hibino, Preparation of PTFE Film with Adhesive Surface Treated by Atmospheric-Pressure Nonthermal Plasma Graft Polymerization, IEEE Transactions on Industry Applications, Vol. 46, No. 5, pp. 1715-1721 (2010.9).

69. M. Okubo, T. Kuroki, K. Yoshida, and T. Yamamoto, Single-Stage Simultaneous Reduction of Diesel Particulate and NOx Using Oxygen-Lean Nonthermal Plasma Application, IEEE Transactions on Industry Applications, Vol. 46, No. 6, pp. 2143-2150 (2010.11).

70. A. Mihalcioiu, K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, Design Factors for NOx Reduction in Nitrogen Plasma, IEEE Transactions on Industry Applications, Vol. 46, Vol. 6, pp. 2151-2156 (2010.11).

[2009]
71. T. Kuroki, T. Fujioka, R. Kawabata M. Okubo, and T. Yamamoto, Regeneration of Honeycomb Zeolite by Nonthermal Plasma Desorption of Toluene, IEEE Transactions on Industry Applications, Vol. 45, No. 1, pp. 10-15 (2009.1).

72. Y. Shimazaki, M. Okubo, T. Yamamoto, and A. Yoshida, Three-Dimensional Numerical Simulation of Nanoparticle Inhalation and Indoor Pollution around Breathing Human, Journal of Environment and Engineering, JSME Electric Journal, Vol. 4, No. 1, pp. 145-161 (2009.1).

73. K. Yoshida, B. S. Rajanikanth, and M. Okubo, NOx Reduction and Desorption Studies under Electric Discharge Plasma in Simulated Gas Mixture: a Case Study on Effect of Corona Electrodes, Plasma Science and Technology, Institute of Physics and IOP Publishing Limited, Vol. 11, No. 3, pp. 327-333 (2009.6).

74. K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, NOx Reduction in Diesel Engine Emission Using Adsorption Followed by Nonthermal Plasma Process: Performances of Three Types of Plasma Reactors, International Journal of Emerging Multidisciplinary Fluid Sciences, Vol. 1, No. 3, pp. 201-211 (2009.9).

75. G. Prieto, O. Prieto, C.R. Gay, K. Yoshida, T. Kuroki, M. Okubo, and T. Yamamoto, Plasma-Adsorption-Catalysis for the Toluene Destruction Process, International Journal of Plasma Environmental Science & Technology, Vol. 3, No. 2, pp. 107-115 (2009.9).

76. M. Okubo, T. Kuroki, S. Kawasaki, K. Yoshida, and T. Yamamoto, Continuous Regeneration of Ceramic Particulate Filter in Stationary Diesel Engine by Nonthermal-Plasma-Induced Ozone Injection, IEEE Transactions on Industry Applications, Vol. 45, No. 5, pp. 1568-1574 (2009.9).

77. K. Yoshida, T. Yamamoto, T. Kuroki, and M. Okubo, Pilot-Scale Experiment for Simultaneous Dioxin and NOx Removal from Garbage Incinerator Emissions Using the Pulse Corona Induced Plasma Chemical Process, Plasma Chemistry and Plasma Processing, Springer, Vol. 29, No. 5, pp. 373-386 (2009.10).

[2008]
78. M. Okubo, N. Arita, T. Kuroki K. Yoshida, and T. Yamamoto, Total Diesel Emission Control Technology Using Ozone Injection and Plasma Desorption, Plasma Chemistry and Plasma Processing, Springer, Vol. 28, No. 2, pp. 173-187 (2008.4).

79. K. Yoshida, T. Hibino, N. Saeki, and M. Okubo, Sterilization Device Using Corona Discharge Plasma Jet at Atmospheric Pressure, Journal of the Institute of Electrostatics Japan, Vol. 32, No. 2, pp. 90-91 (2008.4) (in Japanese).

80. M. Okubo, N. Saeki, and T. Yamamoto, Development of Functional Sportswear for Controlling Moisture and Odor Prepared by Atmospheric Pressure Nonthermal Plasma Graft Polymerization Induced by RF Glow Discharge, Journal of Electrostatics, Elsevier, Vol. 66, No. 7-8, pp. 381-387 (2008.7).

81. M. Okubo, M. Tahara, N. Saeki, and T. Yamamoto, Surface Modification of Fluorocarbon Polymer Films for Improved Adhesion Using Atmospheric-Pressure Nonthermal Plasma Graft-Polymerization, Thin Solid Films, Elsevier, Vol. 516, No. 19, pp. 6592-6597 (2008.8).

82. M. Okubo, M. Tahara, T. Kuroki, T. Hibino, and N. Saeki, Plating Technology for Fluorocarbon Polymer Films Using Atmospheric-Pressure Nonthermal Plasma Graft Polymerization, Journal of Photopolymer Science and Technology, Vol. 21, No. 2, pp. 219-224 (2008.8).

83. T. Kuroki, H. Fujishima, K. Otsuka, T. Ito, M. Okubo, T. Yamamoto, and K. Yoshida, Continuous Operation of Commercial-Scale Plasma-Chemical Aftertreatment System of Smoke Tube Boiler Emission with Oxidation Reduction Potential and pH Control, Thin Solid Films, Elsevier, Vol. 516, No. 19, pp. 6704-6709 (2008.8).

84. M. Okubo, K. Yoshida, and T. Yamamoto, Numerical and Experimental Analysis of Nanosecond Pulse Dielectric Barrier Discharge-Induced Nonthermal Plasma for Pollution Control, IEEE Transactions on Industry Applications, Vol. 44, No. 5, pp. 1410-1417 (2008.9).

85. K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, NOx Aftertreatment Using Thermal Desorption and Nitrogen Nonthermal Plasma Reduction, IEEE Transactions on Industry Applications, Vol. 44, No. 5, pp. 1403-1409 (2008.9).

86. T. Yamamoto, A. Kajimoto, M. Okubo, T. Kuroki, and K. Yoshida, PM and NOx Removal for Diesel Engine Emission Using Ozonizer and Chemical Hybrid Reactor, IEEE Transactions on Industry Applications, Vol. 44, No. 5, pp. 1431-1435 (2008.9).

[2007]
87. K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, Aftertreatment Technology of NOx in Diesel Exhaust Using Concentration by Adsorption and Plasma Reduction (Comparison of Plasma and Thermal Desorptions):Comparison of Plasma and Thermal Desorptions, Transactions of JSME, Vol. 73B, No.725, pp. 372-379 (2007.1) (in Japanese).

88. Y. Shimazaki, M. Okubo, and T. Yamamoto, Three-dimensional Numerical Simulation of Gas-Particulate Flow around Breathing Human and Particulate Inhalation, Journal of Environment and Engineering, JSME Electric Journal, Vol. 2, No. 1, pp. 47-55 (2007.1).

89. T. Kuroki, T. Fujioka, M. Okubo, and T. Yamamoto, Toluene Concentration Using Honeycomb Nonthermal Plasma Desorption, Thin Solid Films, Elsevier, Vol. 515, No. 9, pp. 4272-4277 (2007.3).

90. M. Okubo, N. Arita, T. Kuroki, and T. Yamamoto, Carbon Particulate Matter Incineration in Diesel Engine Emissions Using Indirect Nonthermal Plasma Processing, Thin Solid Films, Elsevier, Vol. 515, No. 9, pp. 4289-4295 (2007.3).

91. T. Yamamoto, G. Tanioka, M. Okubo, and T. Kuroki, Water Vapor Desorption and Adsorbent Regeneration for Air Conditioning Unit Using Pulsed Corona Plasma, Journal of Electrostatics, Elsevier, Vol. 65, No. 4, pp. 221-227 (2007.4).

92. K. Yoshida, M. Okubo, and T. Yamamoto, Distinction between Nonthermal Plasma and Thermal Desorptions for NOx and CO2, Applied Physics Letters, Vol. 90, 131501 (2007.5).

93. T. Kuroki, S. Tanaka, M. Okubo, and T. Yamamoto, Numerical Investigation for CF4 Decomposition Using RF Low Pressure Plasma, IEEE Transactions on Industry Applications, Vol. 43, No. 4, pp. 1075-1083 (2007.7).

94. M. Okubo, H. Kametaka, K. Yoshida, and T. Yamamoto, Odor Removal Characteristics of Barrier-Type Packed-Bed Nonthermal Plasma Reactor, Japanese Journal of Applied Physics, Vol. 46, No. 8A, pp. 5288-5293 (2007.8).

95. T. Yamamoto, M. Okubo, T. Kuroki, and K. Yoshida, Pilot-Plant Experiment for Incinerator Emission Control Using Plasma-Chemical Hybrid Process (Simultaneous Removal of NO. and Gas-Phase Dioxins), Transactions of JSME, Vol. 73B, No. 732, pp. 1767-1774 (2007.8) (in Japanese).

[2006]
96. M. Okubo, N. Saeki, T. Taguchi, and T. Yamamoto, Development of Surface Treatment Apparatus for Manufacturing Functional Wear Using Low-Temperature Plasma, Transactions of JSME, Vol. 72A, No. 714, pp. 263-268 (2006.2) (in Japanese).

97. H. Fujishima, Y. Morita, M. Okubo, and T. Yamamoto, Numerical Simulation of Three-dimensional Electrohydrodynamics of Spiked-electrode Electrostatic Precipitators, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 13, No. 1, pp. 160-167 (2006.2).

98. T. Kuroki, K. Yoshida, H. Watanabe, M. Okubo, and T. Yamamoto, Decomposition of Trace Phenol in Solution Using Gas-Liquid Interface Discharge, Japanese Journal of Applied Physics, Part 1, Vol. 45, No. 5A, pp. 4296-4300 (2006.5).

99. T. Yamamoto, Y. Morita, H. Fujishima, and M. Okubo, Three-dimensional EHD Simulation for Point Corona Electrostatic Precipitator Based on Laminar and Turbulent Models, Journal of Electrostatics, Elsevier, Vol. 64, No. 7-9, pp. 628-633 (2006.7).

100. M. Okubo, T. Kuroki, K. Kitaura, and T. Yamamoto, Diesel Engine Emission Control Using Pulsed Corona Plasma-Wet Chemical Hybrid Process, Journal of Environment and Engineering, JSME Electric Journal, Vol. 1, No. 1, pp. 29-38 (2006.12).

101. K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto, NOx Reduction and Regeneration of Adsorbent Using N2 Nonthermal Plasma, Journal of the Institute of Electrostatics Japan, Vol. 30, No. 6, pp. 284-290 (2006.12) (in Japanese).

[2005]
102. T. Kuroki, J. Mine, M. Okubo, T. Yamamoto, and N. Saeki, CF4 Decomposition Using Inductivity Coupled Plasma (Effect of Power Frequency), IEEE Transactions on Industry Applications, Vol. 41, No.1, pp. 215-220 (2005.1).

103. T. Kuroki, J. Mine, S. Odahara, M. Okubo, T. Yamamoto, and N. Saeki, CF4 Decomposition of Flue Gas from Semiconductor Process Using Inductively Coupled Plasma, IEEE Transactions on Industry Applications, Vol. 41, No. 1, pp. 221-228 (2005.1).

104. M. Okubo, M. Inoue, T. Kuroki, and T. Yamamoto, NOx Reduction Aftertreatment System Using Nitrogen Nonthermal Plasma Desorption, IEEE Transactions on Industry Applications, Vol. 41, No. 4, pp. 891-899 (2005.7).

105. T. Kuroki, S. Tanaka, M. Okubo, and T. Yamamoto, CF4 Decomposition Using Low-Pressure Pulse-Modulated Radio Frequency Plasma, JSME International Journal, Series B, Special Issue on Advanced Fusion of Functional Fluids Engineering, Vol. 48, No. 3, pp. 440-447 (2005.8).

106. T. Yamamoto, M. Ryo, S. Odawara, R. Yasuda, M. Okubo, and T. Kuroki, Simulation of Human Virus Infection Accompanied by Inhalation, Transactions of JSME, Vol 71B, No. 708, pp. 1965-1970 (2005.8) (in Japanese).

107. H. Fujishima, T. Haruna, T. Kuroki, M. Okubo, and T. Yamamoto, NOx Removal Using Indriect Plasma Oxidation and Chemical Hybrid Process (Comparison of Air Radical Injection with Direct Oxidation):Comparison of Air Radical Injection with Direct Oxidation, Transactions of JSME, Vol. 71B, No. 711, pp. 2816-2822 (2005.11) (in Japanese).

[2004]
108. T. Yamamoto, A. Yoshizaki, T. Kuroki, and M. Okubo, Dry Aluminum Surface Treatment Using Nonthermal Plasma Process, Journal of the Institute of Electrostatics Japan, Vol. 28, No. 1, pp. 53-58 (2004.2) (in Japanese).

109. H. Fujishima, T. Kuroki, M. Okubo, and T. Yamamoto, Simultaneous NOx, SOx and Diesel Particulate Removal Using Single-Stage Wet-Type Plasma and Chemical Hybrid Process, Transactions of JSME, Vol. 70B, No. 691, pp. 817-822 (2004.3) (in Japanese).

110. T. Yamamoto, M. Okubo, N. Imai, and Y. Mori, Improvement on Hydrophilic and Hydrophobic Properties of Glass Surface Treated by Nonthermal Plasma Induced by Silent Corona Discharge, Plasma Chemistry and Plasma Processing, Springer, Vol. 24, No. 1, pp. 1-12 (2004.3).

111. T. Kuroki, N. Saeki, M. Okubo, and T. Yamamoto, Decomposition of CF4 Exhaust Gas from Semiconductor Manufacturing Equipments Using Low Pressure Inductively Coupled Plasma (Optimization of Operating Conditions and Byproduct Analysis) Transactions of JSME, Vol. 70B, No. 692, pp. 1058-1063 (2004.4) (in Japanese).

112. T. Yamamoto, C-L. Yang, T. Nagaoka, M. Okubo, T. Kuroki, and M. Okamoto, Electrochemical Methods for Coolant Oil Regeneration, Filtration, The Filtration Society, UK, Vol. 4, No. 2, pp. 109-113 (2004.9).

113. T. Yamamoto, A. Yoshizaki, T. Kuroki, and M. Okubo, Aluminum Surface Treatment Using Three Different Plasma-Assisted Dry Chemical Processes, IEEE Transactions on Industry Applications, Vol. 40, No. 5, pp. 1220-1225 (2004.9).

114. M. Okubo, T. Miyashita, T. Kuroki, S. Miwa, and T. Yamamoto, Regeneration of Diesel Particulate Filter Using Nonthermal Plasma without Catalyst, IEEE Transactions on Industry Applications, Vol. 40, No. 6, pp. 1451-1458 (2004.11).

115. M. Okubo, T. Kuroki, Y. Miyairi, and T. Yamamoto, Low Temperature Soot Incineration of Diesel Particulate Filter Using Remote Nonthermal Plasma Induced by a Pulsed Barrier Discharge, IEEE Transactions on Industry Applications, Vol. 40, No. 6, pp. 1504-1512 (2004.11).

[2003]
116. M. Okubo, T. Kuroki, T. Yamamoto, and S. Miwa, Soot Incineration of Diesel Particulate Filter Using Honeycomb Nonthermal Plasma, SAE Transactions, Journal of Fuels and Lubricants, No.2003-01-1886, pp. 1561-1567 (2003.5).

117. T. Yamamoto, T. Kuroki, M. Okubo, and K. Hayakawa, Simultaneous DeNOx and DeSOx Technology Using Non-Equilibrium Plasma and Chemical Hybrid Process, Transactions of JSME, Vol. 69B, No. 685, pp. 2167-2172 (2003.9) (in Japanese).

118. T. Yamamoto, M. Okuda, and M. Okubo, Three-Dimensional Ionic Wind and Electrohydrodynamics of Tuft/Point Corona Electrostatic Precipitator, IEEE Transactions on Industry Applications, Vol. 39, No. 6, pp. 1602-1607 (2003.11).

119. T. Yamamoto, B. S. Rajanikanth, M. Okubo, T. Kuroki, and M. Nishino, Performance Evaluation of Nonthermal Plasma Reactors for NO Oxidation in Diesel Engine Exhaust Gas Treatment, IEEE Transactions on Industry Applications, Vol. 39, No. 6, pp. 1608-1613 (2003.11).

120. M. Okubo, S. Miwa, T. Kuroki, and T. Yamamoto, Low Temperature Soot Incineration of Diesel Particulate Filter Using Honeycomb Nonthermal Plasma, Transactions of JSME, Vol. 69B, No. 688, pp. 2719-2724 (2003.12) (in Japanese).

[2002]
121. M. Okubo, G. Tanioka, T. Kuroki, and T. Yamamoto, NOx Concentration Using Adsorption and Nonthermal Plasma Desorption, IEEE Transactions on Industry Applications, Vol. 38, No. 5, pp. 1196-1203 (2002.9).

122. T. Yamamoto, M. Okubo, T. Nagaoka, and K. Hayakawa, Simultaneous Removal of NOx, SOx, and CO2 at Elevated Temperature Using a Plasma-Chemical Hybrid Process, IEEE Transactions on Industry Applications, Vol. 38, No. 5, pp. 1168-1173 (2002.9).

123. T. Kuroki, M. Takahashi, M. Okubo, and T. Yamamoto, Single-Stage Plasma-Chemical Process for Particulates, NOx and SOx Simultaneous Removal, IEEE Transactions on Industry Applications, Vol. 38, No. 5, pp. 1204-1209 (2002.9).

124. M. Okubo, M. Hata, T. Kuroki, and T. Yamamoto, Effect of Magnetic Field on NOx Removal using Nonequilibrium Plasma, Journal of the Institute of Electrostatics Japan, Vol. 26, No. 5, pp. 215-219 (2002.10) (in Japanese).

[2001]
125. T. Yamamoto, M. Okubo, N. Imai, Y. Matsumoto, and Y. Mori, Improvement of Hydrophobic and Hydrophilic Properties of Glass Surface Using Nonthermal Plasma, Journal of the Institute of Electrostatics Japan, Vol. 25, No. 2, pp. 105-106 (2001.4) (in Japanese).

126. T. Kuroki, M. Okubo, and T. Yamamoto, Indoor Air Cleaning Technology Using Non-Equilibrium Plasma (Odor Removal in Cigarette smoke), Transactions of JSME, Vol. 67B, No. 658, pp1481-1486 (2001.6) (in Japanese).

127. M. Okubo, T. Kuroki, H. Kametaka, and T. Yamamoto, Odor Control using the AC Barrier Type Plasma Reactors, IEEE Transactions on Industry Applications, Vol. 37, No. 5, Sep./Oct., pp. 1447-1455 (2001.9).

128. T. Yamamoto, M. Okubo, K. Hayakawa, and K. Kitaura, Towards Ideal NOx Control Technology Using a Plasma-Chemical Hybrid Process, IEEE Transactions on Industry Applications, Vol. 37, No. 5, Sep./Oct., pp. 1492-1498 (2001.9).

129. M. Okubo, T. Yamamoto, T. Kuroki, and H. Fukumoto, Electric Air Cleaner Composed of Non-Thermal Plasma Reactor and Electrostatic Precipitator, IEEE Transactions on Industry Applications, Vol. 37, No. 5, Sep./Oct., pp. 1505-1511 (2001.9).

130. T. Yamamoto, M. Okubo, T. Miyashita, and K. Kitaura, NOx Removal in Diesel Engine Exhaust Using Nonequilibrium Plasma and Chemical Process, Transactions of JSME, Vol. 67B, No. 663, pp. 2891-2897 (2001.11) (in Japanese).

131. M. Okubo, T. Yamamoto, T. Kuroki, J. Mine, N. Saeki, and S. Kataoka, Control and Moisture Breath of Functional Cloth Prepared by Plasma-Graft Polymerization, Journal of the Institute of Electrostatics Japan, Vol. 25, No. 6, pp. 328-329 (2001.12) (in Japanese).

[2000]
132. T. Yamamoto, M. Okubo, T. Kuroki, and Y. Yamamoto, Nonthermal Plasma Desorption for NOx Control, Transactions of the Institute of Fluid-Flow Machinery, No. 107, pp. 111-120 (2000.1).

133. J. Mai, M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Instability of Magnetic Fluid Surface under Horizontal Non-uniform Alternating Magnetic Field, Transactions of JSME, Vol. 66B, No. 642, pp. 398-405 (2000.2) (in Japanese).

134. J. Mai, M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Waves on Magnetic Fluid Surface Excited by Horizontal Non-Uniform Alternating Magnetic Field, Transactions of JSME, Vol. 66B, No. 642, pp. 406-414 (2000.2) (in Japanese).

135. T. Kuroki, M. Okubo, H. Fukumoto, and T. Yamamoto, Development of New Electric Air Cleaner for Controlling Particulates and Odors, Journal of Aerosol Research, Vol. 15, No. 2, pp. 116-123 (2000.6) (in Japanese).

136. T. Yamamoto, M. Okubo, K. Hayakawa, and K. Kitaura, Complete NOx Removal Technology Using Nonequilibrium Plasma and Chemical Process (Performances of Ordinary and Barrier Type Plasma Reactors), Transactions of JSME, Vol. 66B, No. 646, pp. 1501-1506 (2000.6) (in Japanese).

137. T. Yamamoto, M. Okubo, and M. Fujimoto, Desorption and Regeneration of NO Using Non-equilibrium Plasma, Journal of the Institute of Electrostatics Japan, Vol. 24, No. 3, pp. 161-162 (2000.6) (in Japanese).

138. T. Yamamoto, M. Okubo, K. Hayakawa, and K. Kitaura, Complete NOx Removal Using Nonthermal Plasma and Chemical Processes, Journal of the Institute of Electrostatics Japan, Vol. 24, No. 4, pp. 208-212 (2000.8) (in Japanese).

[1999]
139. L. Kushida, M. Okubo, D. Biswas, and H. Yamasaki, Three-Dimensional Numerical Simulation on Supersonic Flow and Total Pressure Loss in Disk Channel, Transactions of JSME, Vol. 65B, No. 634, pp. 1899-1906 (1999.6) (in Japanese).

140. Y. Okuno, T. Okamura, K. Yoshikawa, T. Suekane, K. Tsuji, M. Okubo, T. Maeda, T. Murakami, H. Yamasaki, S. Kabashima, S. Shioda, and Y. Hasegawa, High Enthalpy Extraction Experiments with Fuji-1 MHD Blow-down Facility, Energy Conversion & Management, Vol. 40, pp. 1177-1190 (1999.7).

141. R. Hanaoka, M. Takata, M. Suzuki, K. Wada, K. Chikamura, N. Yamaguchi, J. Masuda, M. Okubo, and H. Yamasaki, Effects of Area Ratio on Performances of Disk MHD Generator with Argon, Trans. IEE of Japan, Vol. 118B, No. 7/8, pp. 866-873 (1998.7) (in Japanese).

142. M. Okubo, Y. Okuno, S. Kabashima, and H. Yamasaki, Numerical Simulation of Discharge Structure in Ar/Cs Plasma Disk MHD Generator, Transactions of IEE of Japan, Vol. 119B, No. 7, pp. 820-827 (1999.7) (in Japanese).

[1997]
143. M. Okubo and H. Yamasaki, Numerical Prediction on Performance of Disk Plasma MHD Generator, Trans. of IEE of Japan, Vol. 117B, No. 1, pp. 122-129 (1997.1) (in Japanese).

144. M. Takata, Y. Nagasaki, K. Hayakawa, M. Okubo, and H. Yamasaki, Effects of Load Connection on Performance of Disk MHD Generator, Trans. IEE of Japan, Vol. 117B, No. 9, pp. 1282-1287 (1997.9) (in Japanese).

145. M. Takata, Y. Nagasaki, K. Hayakawa, M. Okubo, and H. Yamasaki, Magneto-Acoustic Instability in Disk CCMHD Generator, Trans. IEE of Japan, Vol. 117B, No. 12, pp. 1584-1592 (1997.12) (in Japanese).

[1996]
146. J. Ishimoto, M. Okubo, and S. Kamiyama, Study on Stability of Boiling Two-Phase of Magnetic Fluid, Transactions of JSME, Vol. 62B, No. 595, pp. 903-912 (1996.3) (in Japanese).

[1995]
147. J. Ishimoto, M. Okubo, and S. Kamiyama, Basic Study on an Energy Conversion System Using Boiling Two-Phase Flows of Temperature-Sensitive Magnetic Fluid (Theoretical Analysis Based on Thermal Nonequilibrium Model and Flow Visualization Using Ultrasonic Echo), Transactions of JSME, Vol. 61B, No. 581, pp. 157-165 (1995.1) (in Japanese).

148. K. Tsuji, Y. Niwa, T. Kaneko, M. Okubo, and H. Yamasaki, Characteristics of Flow and Plasma under High MHD Interaction in Nonequilibrium Disk MHD Generator Using Argon, Trans. IEE of Japan, Vol. 115B, No. 2, pp. 164-171 (1995.2) (in Japanese).

149. S. Kamiyama, M. Okubo, J. Ishimoto, and M. Higashitani, Bubble Behaviour in a Magnetic Fluid under a Nonuniform Magnetic Field, JSME Int. Journal, Ser.B, Vol. 38, No. 3, pp. 382-387 (1995.8).

[1994]
150. M. Okubo, J. Ishimoto, H. Nishiyama, and S. Kamiyama, Analytical Study on Two-phase MHD Flow of Electrically Conducting Magnetic Fluid, Magnethydrodynamics (Translated from Russian Journal, Magnitnaja Gidrodinamika), Vol. 29, No.3, pp. 291-297 (1994.1).

151. J. Ishimoto, M. Okubo, and S. Kamiyama, Study of the MHD Power-Generation System Using Two-phase Flows of Temperature-Sensitive Electrically Conducting Magnetic Fluids (Analysis of Flow Characteristics in a Pipe and the Power-Generation Characteristics), Transactions of JSME, Vol. 60B, No. 571, pp. 891-898 (1994.3) (in Japanese).

152. Y. Shimokawa, M. Okubo, K. Hayashi, and S. Kamiyama, Basic Study of Non-Contacting Support of Thin Plate by Fluid Cushion Force, Transactions of JSME, Vol. 60B, No. 572. pp. 1176-1181 (1994.4) (in Japanese).

153. Y. Shimokawa, M. Okubo, and S. Kamiyama, Basic Study on Non-Contacting Support of Thin Plate by Fluid Cushion Force, Transactions of JSME, Vol. 60B, No. 575, pp. 2425-2430 (1994.7) (in Japanese).

[1993]
154. M. Okubo, Y. Katsumura, S. Oshima, S. Kamiyama, and R. Yamane, Local Velocity Measurement of Magnetic Fluid Flow Using Laser Optical Fiber Sensor, Journal of Magnetisum and Magnetic Materials, Vol. 122, No.1-3, pp. 200-203 (1993.4).

155. M. Okubo, Y. Katumura, S. Oshima, S. Kamiyama, and R. Yamane, Open Channel Flows of Magnetic Fluid Induced by Traveling Magnetic Field, Transactions of JSME, Vol. 59B, No. 562, pp. 1777-1784 (1993.6) (in Japanese).

156. H. Nishiyama, T. Saisu, M. Okubo, and S. Kamiyama, Numerical Simulation of a Non-equilibrium Plasma Jet in the Applied Magnetic Field, Transactions of JSME, Vol. 59B, No. 562, pp. 1854-1862 (1993.6) (in Japanese).

157. S. Nam, M. Okubo, H. Nishiyama, and S. Kamiyama, Numerical Analysis of Heat Transfer and Fluid Flow on High-Temperature Jet Including Particles in Plasma Spraying, Transactions of JSME, Vol. 59B, No.563, pp. 2135-2141 (1993.7) (in Japanese).

158. J. Ishimoto, M. Okubo, H. Nishiyama, and S. Kamiyama, Basic Study on an Energy Conversion System Using Gas-liquid Two-phase Flows of Magnetic Fluid (Analysis on the Mechanism of Pressure Rise), Transactions of JSME, Vol. 59B, No. 566, pp. 3071-3077 (1993.10) (in Japanese).

[1992]
159. H. Nishiyama, M. Okubo, T. Miyadera, and S. Kamiyama, Numerical Analysis of Heat Transfer and Fluid Flow in Plasma Spraying, Transactions of JSME, Vol. 58B, No. 547, pp. 736-742 (1992.3) (in Japanese).

160. S. Kamiyama, M. Okubo, and F. Fujisawa, Recent Development of Technology in Magnetic Fluid Experiment, Experimental Thermal and Fluid Science, Vol. 5, pp. 641-651 (1992.5).

[1991]
161. M. Okubo, H. Endo, Y. Ishibashi, S. Oshima, and R. Yamane, Local Velocity Measurement of Magnetic Fluid Flow Using Semiconductor Laser and Optical Fiber, Transactions of JSME, Vol. 57B, No. 541, pp. 3278-3284 (1991.9) (in Japanese).

[1990]
162. M. Okubo, Y. Ishibashi, S. Oshima, H. Katakura, and R. Yamane, Interfacial Waves of the Magnetic Fluid in Vertical Alternating Magnetic Fields, Journal of Magnetism and Magnetic Materials, Vol. 85, No. 1-3, pp. 163-166 (1990.4).

[1989]
163. M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Magnetic Fluid Flows in a Traveling Magnetic Field (Analysis on Flow in Channel), JSME Int. Journal, Series 2, Vol. 32, No. 1, pp. 39-46, (1989.2).

164. M. Okubo, H. Ozaki, Y. Ishibashi, S. Oshima, and R. Yamane, Measurement of Magnetic Fluid Flows Using Laser Optical Fibers, J. of the Japan Society of Powder and Powder Metallurgy, Vol. 36, No. 6, pp. 770-773 (1989.8) (in Japanese).

165. M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Interfacial Instability of Magnetic Fluid in Alternating Magnetic Field, Transactions of JSME, Vol. 55B, No. 518, pp. 2968-2976 (1989.10) (in Japanese).

166. M. Okubo, Y. Ishibashi, S. Oshima, H. Katakura, and R. Yamane, Interfacial Instability of Magnetic Fluid in Alternating Magnetic Field (2nd Report, Experiment on Surface Instability Curves), Transactions of JSME, Vol. 55B, No. 520, pp. 3703-3708 (1989.12) (in Japanese).

167. M. Okubo, Y. Ishibashi, S. Oshima, H. Katakura, and R. Yamane, Interfacial Instability of Magnetic Fluid in Alternating Magnetic Field (3rd Report, Linear Stability Analysis of Viscous Flow), Transactions of JSME, Vol. 55B, No. 520, pp. 3709-3715 (1989.12) (in Japanese).

[1988]
168. M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Magnetic Fluid Flows in a Rotating Magnetic Field (1st Report, Experiments on Shape of Free Surface and Circulation Velocity), Transactions of JSME, Vol. 54B, No. 505, pp. 2383-2389 (1988.9) (in Japanese).

169. M. Okubo, Y. Ishibashi, S. Oshima, and R. Yamane, Magnetic Fluid Flows in a Rotating Magnetic Field (2nd Report, Analyses on Shape of Free Surface and Circulation Velocity), Transactions of JSME, Vol. 54B, No. 505, pp. 2390-2398 (1988.9) (in Japanese).

170. M. Okubo, R. Yamane, and S. Oshima, Coherent Structure in the Turbulent Wake behind a Circular Cylinder (2. Numerical Simulation Using the Vortex Filament Model), Fluid Dynamics Research, Vol. 4, pp. 39-46 (1988.12).

171. R. Yamane, S. Oshima, M. Okubo, and J. Kotani, Coherent Structure in the Turbulent Wake behind a Circular Cylinder, (3. Flow Visualization and Hot Wire Measurements), Fluid Dynamics Research, Vol. 4, pp. 47-56 (1988.12).

（以下現在作成中のためお待ちください）

自己紹介として、所属機関と役職を記載します。その他、出版物への寄稿や名誉職などの肩書きがあれば、挙げます。これまでに執筆した、または参加した主要な出版物と、特筆すべき業績にも簡単に触れる予定です。

学歴や経歴について詳しく書きます。力を入れている分野について詳しく掘り下げ、読者があなたの現在の役割や取り組みをより明確に理解できるような内容を盛り込みます。

最後に、学位、受賞歴、所属、加盟団体、主なメディア出演などを記載します。